[GO] Unlimited Adjacent Fortification

by **reverend_kyle** on Fri Mar 09, 2007 2:47 am

My one account was busted as a multi, when I wasn't one and never played over there, so I created 4 accounts and deadbeated with them.

by **Spritzking** on Fri Jun 22, 2007 11:41 am

Suggestion Idea:
I would like to see a mode where all you armies can be fortified over just one border.

Specifics:
I mean that at the end of your turn, every armies has 1 mp. this means that you can move all your armies at the end of your turn, but not over great distances. I saw in luxdelux, that it is possible

Why it is needed:
We have at the moment the folowing fortification table:
............................Long distances.....Short distances
All your armies.........Unlimeted..................?
1 country..................Chained...............Adjacent

This means that we have an fortification gap.
In practice this works as follows. If you play a large map, like world2.1 you can have your armies gathered together in a few turns. (not with chained and adjacent) And after that turns when there starts a new era, in wich you fight from your own continents, you can not easely bring your armies from one battle zone towards the other. This will give whole new tactics to unlimeted fortification...

priority: 3

by **ParadiceCity9** on Fri Jun 22, 2007 10:24 pm

ive read this 38 times and i have no idea what you mean still

by **hecter** on Fri Jun 22, 2007 10:31 pm

ParadiceCity9 wrote:ive read this 38 times and i have no idea what you mean still

I think he means Unlimited Adjacent. You have unlimited fortifications, but you can only move each guy once. So, you have, lets say, this lame ass map ("-"'s representing borders):

A-B-C-D-E-F

You can fortify all your guys from A to B, and all the guys that were on B when you ended your attacks to C, and all your guys form E to C, ect., but not from A to C, or from F to C, ect. You also cannot move your guys that you moved from A to B, to B to C that turn.

by **wcaclimbing** on Fri Jun 22, 2007 10:46 pm

too confusing

by **Spritzking** on Sat Jun 23, 2007 4:56 am

Hecter is right, that is what i ment.

by **RobinJ** on Sat Jun 23, 2007 5:54 am

wcaclimbing wrote:too confusing

Yep, it is too confusing. The idea is good but it would be hard to keep track of how many you have already moved. Say you fortify your 10 on A to your 10 on B. Then, it would be very confusing because you would only be able to fortify 10 from B into C. This would get worse if you were doing a lot of fortifications (which often happens near the beginning of the game) so I'm afraid this one gets the thumbs down from me

by **Spritzking** on Sat Jun 23, 2007 6:50 am

well in lux it does work... and at leat i understand

by **chessplaya** on Sat Jun 23, 2007 8:06 am

umm so basically whats the idea here ?

by **AAFitz** on Sat Jun 23, 2007 8:15 am

though written in another illegible language, it isnt a bad idea...it think its a variation ive played on the board to be honest...

I think its been suggested before too..I imagine we will see another fortification option eventually...and it will be something like this

by **yeti_c** on Sat Jun 23, 2007 9:02 am

If coded correctly then this wouldn't be too confusing...

Although you would get a load of illegal move messages sometimes!!

I like the premise - but changes in the UI might be necessary to stop whinging!!

C.

by **Spritzking** on Sat Jun 23, 2007 12:06 pm

well i am not very good at explaining thing very clear in english...

yeti can you help me with it?

by **lduke1990** on Sat Jun 23, 2007 10:27 pm

basically, each army can only cross one border. To do this right you would have to put a boolean flag on each army after the player clicks the "end attacks" button. To start fortification, each flag would be set to "no" as in that particular army hasn't moved yet. Then, when the army crosses a border, the flag changes to yes and then that army can no longer move that turn.

by **yeti_c** on Sun Jun 24, 2007 2:02 am

It's a bit trickier than that though...

You have to be able to display who can still move in the UI...

Something that isn't possible with the way it currently works.

For that to work I would change the Fortify Drop Downs around to be

"FROM" "#" "TO"

Then when you select a From territory it flows updates to the other 2 to only show what you can move from that territory to the next.

This would eliminate the confusion over how many you're still allowed to move for that territory.

C.

PS Remember of course there is a nuance here you may have missed...

On Classic say that you have 3 in Papua New Guinea (PNG), 3 in Eastern Australia. 1 in Indonesia and 1 in Siam.

As it stands...
You can move
2 from Eastern Australia to PNG.
2 from PNG to Indo.

However as soon as you move 2 from EA to PNG... that free up your 1 that had to stay behind... now you can move 3 to Indo...

Once they get there... your 1 from Indo can move to Siam... and of course your 1 from Siam could move to China (Or to indo if you really want!)

Essentially - you could chain 1 troop along to the ends of your countries by moving the guy that holds the territory.

C.

by **Spritzking** on Mon Jun 25, 2007 3:37 am

well maybe there could be implented that the first army is locked...

by **Aleksei** on Thu Jul 05, 2007 12:47 pm

Just a thought. Not sure if it has been tossed around before. Would it be possible to make a fortifications set up where the creator could chose how many fortifications are allowed a turn. Like rather than unlimited or 1 you could have a max 3 a turn. This would help on games in World 2.1 where there are a lot of countries but you want more strategy involved (unlike games with unlimited fortifications).

Or make the adjacent set up that you can move as many armies as you want but only to the country next to it. Once an army is transfered over, it must stay there until the next turn. Might be a little harder to make in the games but its a thought.

by **chessplaya** on Thu Jul 05, 2007 3:30 pm

it has been said not too long ago

and u havent even used the form

by **BeakerWMA** on Wed Jul 18, 2007 8:40 pm

Sorry if this has been mentioned before.

Concise Idea:
How about a new fortification type: "Unlimited Adjacent".

Suggestion idea:
As long as the countries are adjacent you can move as many times as you want.

Specifics:
If you were in a war you would be able to move armies from more than one place at a time (making it different than adjacent), however mobilizing through more than one country would take too much time to accomplish (making it different from Chained and Unlimited) - hence Unlimited Adjacent.

The biggest problem IMO would be, for example, moving from Eastern Australia to New Guinea and then from New Guinea to Indonesia - I would suggest a blocker (of some sort in the script) that prevents fortifying from countries that have had armies previously forted to it (so if you did want armies from New Guinea to Indonesia you would have to do that move first than do Eastern Australia to New Guinea afterward).

Why it is needed:
Just a thought for a new type of game.

by **BeakerWMA** on Sat Jul 21, 2007 10:10 am

Thoughts, comments? I know you're out there I can hear your breathing!

by **Risktaker17** on Sat Jul 21, 2007 10:27 am

I like it a lot. I have thought about this idea a lot, I like it. I don't know how you could program the way to stop from moving throughout all your armies. But keep bugging people about it eventually you'll get some responses.

by **DiM** on Sat Jul 21, 2007 11:25 am

BeakerWMA wrote:Sorry if this has been mentioned before.

Concise Idea:
How about a new fortification type: "Unlimited Adjacent".

Suggestion idea:
As long as the countries are adjacent you can move as many times as you want.

Specifics:
If you were in a war you would be able to move armies from more than one place at a time (making it different than adjacent), however mobilizing through more than one country would take too much time to accomplish (making it different from Chained and Unlimited) - hence Unlimited Adjacent.

The biggest problem IMO would be, for example, moving from Eastern Australia to New Guinea and then from New Guinea to Indonesia - I would suggest a blocker (of some sort in the script) that prevents fortifying from countries that have had armies previously forted to it (so if you did want armies from New Guinea to Indonesia you would have to do that move first than do Eastern Australia to New Guinea afterward).

Why it is needed:
Just a thought for a new type of game.

it's impossible because of the bolded part. and without that blocker it's useless :wink:

by **BeakerWMA** on Fri Jul 27, 2007 2:51 pm

well, that sucks

by **treefiddy** on Fri Jul 27, 2007 4:39 pm

This was previously suggested and rejected.

http://www.conquerclub.com/forum/viewtopic.php?t=9330

by **BeakerWMA** on Fri Jul 27, 2007 4:45 pm

Maybe programming has come far enough since it was first suggested to make it doable!

by **Awesome** on Mon Jul 30, 2007 11:48 am

This was the way I always played. Back when I played risk on a board.

I understand the difficulty of programming this, but it certainly would be great to have this option.

It makes the most sense of any of the fortification rules.

[GO] Unlimited Adjacent Fortification

suggestion: 1 border fortification for all armies

Fortification Idea

Unlimited Adjacent Fortifications

Re: Unlimited Adjacent Fortifications

Who is online